Unverified85% confidenceDecision RuleTime unknown
材质厚度选PA+PE复合膜且≥0.08mm（80微米）以上，低于0.06mm的薄款反复卷压易在折痕处爆裂漏气
1
Sources
85%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified选择材质厚度≥100微米（0.1mm）的PA+PE复合膜，才能兼顾抗穿刺和反复卷压不破裂；低于70微米的薄款卷压2-3次后接缝易漏气93% similarUnverified袋体材质厚度看PA+PE复合层，总厚度≥0.08mm（80微米）才耐扎耐反复使用，低于0.06mm的薄款用几次就出现针孔漏气93% similarUnverified袋体材质厚度选PA+PE复合膜且总厚度≥0.08mm（约80丝）才耐扎耐反复使用，低于0.06mm的薄款反复卷压后易在折痕处开裂漏气93% similarUnverified袋体膜厚建议选≥0.08mm（PA+PE复合材质），低于0.06mm的薄膜在压缩后棱角处易被内容物顶破漏气92% similarUnverified袋体材质厚度建议选PA+PE复合膜且≥0.1mm（约100丝以上），过薄材质在压缩后棱角处易被顶破漏气89% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/120380API
curl https://kongchang.com/api/v1/knowledge/claims/120380MCP
get_claim(id=120380)