Unverified82% confidenceDecision RuleTime unknown
袋体材质厚度看PA+PE复合层，总厚度≥0.08mm（80微米）才耐扎耐反复使用，低于0.06mm的薄款用几次就出现针孔漏气
1
Sources
82%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified袋体材质厚度选PA+PE复合膜且总厚度≥0.08mm（约80丝）才耐扎耐反复使用，低于0.06mm的薄款反复卷压后易在折痕处开裂漏气95% similarUnverified材质厚度选PA+PE复合膜且≥0.08mm（80微米）以上，低于0.06mm的薄款反复卷压易在折痕处爆裂漏气93% similarUnverified袋体材质厚度选择：PA+PE复合膜厚度≥0.08mm（80微米）才具备较好抗穿刺和防漏气能力，低于0.06mm的廉价袋易在折角处漏气失效91% similarUnverified材质厚度看复合层：PA+PE复合材质厚度≥100微米（0.1mm）耐穿刺，低于80微米的PE单层袋反复抽气后封条处易开裂，重复使用不超过5次91% similarUnverified袋体材质厚度以复合PA+PE材质、单层厚度≥0.08mm（80丝）为耐用门槛，低于此值反复折叠边角易破裂漏气；追求多次使用应选≥0.1mm加厚款90% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/155999API
curl https://kongchang.com/api/v1/knowledge/claims/155999MCP
get_claim(id=155999)