Unverified82% confidenceDecision RuleTime unknown
U型防夹手贴内槽宽度需匹配车门钣金厚度，一般家用车门边缘厚度为0.8-1.2mm，选择内槽卡口2-4mm的U型条卡合最紧且不易脱落
1
Sources
82%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified门缝防夹条选U型卡扣式适配门厚需精确测量：普通室内门厚35-45mm选U型夹缝款，超过45mm的实木门或防盗门须选贴附式C型条，否则U型口撑不住会脱落90% similarUnverifiedU型可拆卸条状防夹（套在门边而非粘贴）适配门厚有范围限制，主流产品适配门厚约30-45mm，选购前需测量门板厚度，超薄或超厚门会松脱87% similarUnverifiedU型门弓器式门扣适配门厚通常有35-45mm标准范围，防盗门（含门框）常超过50mm，需确认产品标注的最大夹持厚度，否则装不上85% similarUnverified防风固门用途选U型卡门器时，卡口内径需比门厚小2-3mm形成过盈配合才能夹紧，尺寸完全等于门厚则夹不住84% similarUnverified常见规格：薄款厚度约5-8mm适合日常防磕，加厚款10-15mm适合学步期防撞头；宽度以能完整包住边缘台面为准，一般U型条内槽宽10-30mm对应不同板厚80% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/125824API
curl https://kongchang.com/api/v1/knowledge/claims/125824MCP
get_claim(id=125824)