Unverified75% confidenceDecision RuleTime unknown
防风固门用途选U型卡门器时，卡口内径需比门厚小2-3mm形成过盈配合才能夹紧，尺寸完全等于门厚则夹不住
1
Sources
75%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
UnverifiedU型防夹手贴内槽宽度需匹配车门钣金厚度，一般家用车门边缘厚度为0.8-1.2mm，选择内槽卡口2-4mm的U型条卡合最紧且不易脱落84% similarUnverified门底缝隙3-25mm选U型双面挡条（下方硅胶密封条+可滑动收紧结构），单侧粘贴条仅适合缝隙≤10mm的场景，缝隙过大时单侧条无法完全贴合门底82% similarUnverified门缝防夹条选U型卡扣式适配门厚需精确测量：普通室内门厚35-45mm选U型夹缝款，超过45mm的实木门或防盗门须选贴附式C型条，否则U型口撑不住会脱落81% similarUnverified包边内径需比护栏管实际直径小5-8mm才能形成有效包裹张力，管径2cm的护栏应选内径1.2-1.5cm的U型槽，过松易脱落，过紧则安装困难且回弹时会崩开81% similarUnverifiedU型门弓器式门扣适配门厚通常有35-45mm标准范围，防盗门（含门框）常超过50mm，需确认产品标注的最大夹持厚度，否则装不上81% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/354688API
curl https://kongchang.com/api/v1/knowledge/claims/354688MCP
get_claim(id=354688)