Unverified75% confidenceFactTime unknown
批头长度分标准头和加长头，深孔位螺丝（如某些笔记本、显卡）需批头长度≥40mm或搭配延长杆，短批头刀杆会被机身孔壁卡住无法对准螺丝
1
Sources
75%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified工具最长插袋深度需比常用螺丝刀总长深2-3cm以防脱落，标准长柄螺丝刀约20cm，故深插袋应≥22cm79% similarUnverified钩口内径（开口宽度）需≥拟悬挂物挂环直径+3mm，橱柜挂杆常见杆径10-12mm，衣柜圆杆多为25mm，购买前必须实测杆径否则挂不稳或卡不进79% similarUnverified桌沿超过40mm的加厚工作台或带边框的升降桌不建议选普通夹钩，多数夹口最大仅支持40mm，需选长臂加深夹或改用磁吸/打孔安装76% similarUnverified桌面厚度超过孔盖卡扣咬合范围(常见适配18-25mm板厚)会卡不牢,厚实的实木桌或双层板面需确认孔盖卡爪深度,否则会晃动或掉落76% similarUnverified项链收纳需带挂钩式竖立分区（单格深度≥8cm）或独立平铺长格（长度≥20cm），普通小方格会导致细项链打结，解开耗时且易损伤链扣75% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/244560API
curl https://kongchang.com/api/v1/knowledge/claims/244560MCP
get_claim(id=244560)