Unverified75% confidenceDecision RuleTime unknown
工具最长插袋深度需比常用螺丝刀总长深2-3cm以防脱落，标准长柄螺丝刀约20cm，故深插袋应≥22cm
1
Sources
75%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified隐藏搁板的悬挑力矩随长度增加而放大，同样承重下60cm搁板比30cm搁板对螺栓的拉拔力大一倍，长度>80cm时建议至少3个固定点且板厚≥30mm，否则中部易下垂80% similarUnverifiedS钩开口内径需比悬挂杆直径大2-4mm：挂衣杆（直径约25mm）选开口28mm以上，晾衣绳选小开口15mm防滑脱80% similarUnverified挂钩钩深（钩子内空间深度）应≥3cm才能稳挂衣架和厚衣物，钩深不足2cm的款只适合挂环状物或毛巾80% similarUnverified顶天立地式伸缩杆搁架的锁定长度必须留5-10cm余量：标称范围200-300cm的产品，实际稳固区间在210-290cm，接近极限值时管壁咬合变浅极易松脱坠落79% similarUnverified批头长度分标准头和加长头，深孔位螺丝（如某些笔记本、显卡）需批头长度≥40mm或搭配延长杆，短批头刀杆会被机身孔壁卡住无法对准螺丝79% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/334406API
curl https://kongchang.com/api/v1/knowledge/claims/334406MCP
get_claim(id=334406)