Unverified68% confidenceCautionTime unknown
塑料/聚碳酸酯机身喷漆前需做火焰处理或涂附着力促进剂，否则漆膜与塑料结合力差；ABS材质忌用含强溶剂漆料，会腐蚀基材导致开裂
1
Sources
68%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified塑料机身（中低端机、部分后盖）选溶剂型漆兼容性最好，附着力强；但溶剂过强会溶解原塑料表面导致发白，首次使用应在机身隐蔽处（如卡槽附近）试涂验证79% similarUnverified打胶前基材必须干燥无油无尘，潮湿或有残留清洁剂时不该施工，否则粘接力大幅下降；瓷砖缝建议先用美纹纸贴出直边再打胶78% similarUnverified涂层聚酯材质长期反复摩擦或频繁折叠后，防水涂层存在老化脱落风险，耐用性不及热压复合面料产品，属于消耗品定位77% similarUnverified厨房油污潮湿环境优先ABS/PP塑料层板而非碳钢铁艺，铁艺款喷漆层遇水汽长期易生锈，尤其焊接点和螺丝孔位是锈蚀高发区77% similarUnverified带大量胶印图案、烫钻、PU涂层或复合面料的衣物不建议干洗，四氯乙烯等溶剂会溶解胶质导致图案脱落、涂层开裂77% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/245061API
curl https://kongchang.com/api/v1/knowledge/claims/245061MCP
get_claim(id=245061)