Unverified80% confidenceTradeoffTime unknown
套装数量并非越多越省：门把手/铰链类配件因门厚孔距差异，整套采购前需确认孔距（常见96/128/160mm）和门板厚度匹配
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified旧橱柜换阻燃门板需先测量原柜体孔位（通用杯型铰链孔径35mm、孔中心距边缘22.5mm）和门板厚度公差，非标定制门板需确认厂家能匹配原有铰链孔位，否则需重新打孔影响强度80% similarUnverified购买前需确认车门空腔深度，10-15mm厚度对大多数乘用车车门适用，但部分空腔较浅的车型安装后可能影响车门内板回装80% similarUnverified选购前需测量门与门框之间的缝隙（门缝间隙），常见门扣适配缝隙范围为3-8mm，缝隙过大需选带加长扣板或可调节底座的型号，否则无法咬合到位79% similarUnverified6.5寸尺寸覆盖主流车型前门安装位，但实际安装需确认门板开孔尺寸及安装深度是否匹配，部分车型需定制安装板或加装隔音垫79% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/332865API
curl https://kongchang.com/api/v1/knowledge/claims/332865MCP
get_claim(id=332865)