Unverified78% confidenceDecision RuleTime unknown
购买前需确认车门空腔深度，10-15mm厚度对大多数乘用车车门适用，但部分空腔较浅的车型安装后可能影响车门内板回装
1
Sources
78%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified车门防夹条内槽卡口宽度需匹配车门钣金边缘厚度，主流轿车门边为0.8-1.2mm，SUV或加厚车门可达1.5mm，卡口过宽会脱落、过窄则装不进81% similarUnverified购买前先量墙面净宽和进深，落地架进深30cm是通用尺寸但会侵占过道；窄缝隙（冰箱旁/洗衣机旁）选进深15-20cm带滚轮的夹缝置物架81% similarUnverified套装数量并非越多越省：门把手/铰链类配件因门厚孔距差异，整套采购前需确认孔距（常见96/128/160mm）和门板厚度匹配80% similarUnverified购买前需确认车架坐管孔径（30.9或31.6mm）以及可用插入深度，因为集成减震机构导致坐管整体长度较长，小尺寸车架可能无法容纳80% similarUnverified选购前需测量门窗框空余安装面宽度（通常需≥15mm平整面），窄框铝窗可能无足够贴合面导致限位器安装后遮挡纱窗或影响开合79% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/610000API
curl https://kongchang.com/api/v1/knowledge/claims/610000MCP
get_claim(id=610000)