Unverified80% confidenceDecision RuleTime unknown
防滑套内径需匹配衣架横杆直径，塑料衣架横杆多为3-5mm，实木衣架可达8-12mm，套筒内径偏小2mm左右套上后更服帖不滑动
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified带穿孔的服装吊牌标准孔径约3-4mm，配套塑料吊粒（子母扣）长度分5cm/7cm/12cm，厚衣物如羽绒服需选7cm以上避免绷紧勒坏挂孔89% similarUnverified开口尺寸兼容性：挂杆直径与S钩上端开口需匹配，衣柜圆杆直径通常16-25mm，晾衣杆约20-32mm，选择开口内径比目标杆径大2-3mm的款式才能顺畅挂取又不松脱85% similarUnverified宽度选择：固定小敷料/输液针用1.25cm；一般纱布固定用2.5cm；大面积敷料或多管路固定用5cm。宽度不足会导致固定不牢反复缠绕，过宽则浪费且限制关节活动85% similarUnverified钩头开口尺寸决定适配性：挂羽绒服、大衣的粗衣架需开口≥25mm、钩头深度≥30mm；仅挂毛巾、抹布可选窄钩头，钩头过浅衣物易滑落85% similarUnverified挂钩间距＜6cm时挂多件衣物会相互挤压变形，玄关挂大衣外套建议选间距≥8cm的挂钩排85% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/372538API
curl https://kongchang.com/api/v1/knowledge/claims/372538MCP
get_claim(id=372538)