Unverified75% confidenceFactTime unknown
带穿孔的服装吊牌标准孔径约3-4mm，配套塑料吊粒（子母扣）长度分5cm/7cm/12cm，厚衣物如羽绒服需选7cm以上避免绷紧勒坏挂孔
1
Sources
75%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified防滑套内径需匹配衣架横杆直径，塑料衣架横杆多为3-5mm，实木衣架可达8-12mm，套筒内径偏小2mm左右套上后更服帖不滑动89% similarUnverified常见标准吊牌尺寸约4×6cm至5×8cm，穿绳孔径3-4mm并需打孔加固（铜圈/爆花）防止撕裂，无加固孔在蜡绳拉力下易撕破86% similarUnverified挂衣杆式收纳袋顶部开口宽度需≥衣杆直径+2cm，常见衣杆直径2.5-3.5cm，开口过窄会导致无法套入或长期磨损；带魔术贴环扣的可适配任意粗细衣杆85% similarUnverified挂钩钩深（钩子内空间深度）应≥3cm才能稳挂衣架和厚衣物，钩深不足2cm的款只适合挂环状物或毛巾83% similarUnverified胸针尺寸建议控制在4-6cm，超过7cm易压垮薄面料且显厚重；针织衫、雪纺等轻薄面料应选5cm以内且带衬垫或双针固定的款式，避免留下明显针孔83% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/110863API
curl https://kongchang.com/api/v1/knowledge/claims/110863MCP
get_claim(id=110863)