Unverified80% confidenceDecision RuleTime unknown
入炉使用的托盘壁厚需≥0.8mm（铝盘）或≥0.5mm（碳钢盘），过薄会在高温下变形翘曲导致受热不均
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified锅体主体壁厚≥2.5mm、底部复合层≥4mm的加厚压力锅蓄热更均匀，长时间炖煮不易糊底；纯铝合金薄壁款（≤1.5mm）虽升压快但受热变形风险高85% similarUnverified模具壁厚影响导热与保温，0.6mm以上厚度的铝合金/碳钢受热更均匀不易局部焦糊，过薄的模具边缘上色快中心不熟84% similarUnverified钛锅壁厚一般0.3-0.4mm，超薄款极易局部过热变色/糊底，用钛锅烹饪需小火并不断搅动；铝锅壁厚多在1.0mm以上导热更均匀84% similarUnverified碳钢模具的钢板厚度影响耐用度和受热均匀性，0.4mm以下薄钢易受热变形翘曲导致烘烤不均，选0.5-0.8mm加厚碳钢更稳定84% similarUnverified锅底厚度≥4mm或采用三层/五层复合钢底的不粘锅导热更均匀、不易局部糊底，单层薄铝底（＜2.5mm）易出现受热不均和变形83% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/446427API
curl https://kongchang.com/api/v1/knowledge/claims/446427MCP
get_claim(id=446427)