Unverified80% confidenceDecision RuleTime unknown
安装前需确认车门边缘钣金厚度在适配范围（约2-4mm），厚度不匹配会夹不紧或装不上
1
Sources
80%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified购买前确认所用胶带芯径是否为3英寸（76mm），部分廉价胶带芯径偏小会装不上或松动78% similarUnverifiedU型防夹手贴内槽宽度需匹配车门钣金厚度，一般家用车门边缘厚度为0.8-1.2mm，选择内槽卡口2-4mm的U型条卡合最紧且不易脱落76% similarUnverified适配3英寸芯径、宽度60mm以内的胶带，购买前需确认自己常用胶带的芯径和宽度是否匹配，窄胶带（如文具透明胶）无法适配76% similarUnverified型材壁厚国标要求外框主受力壁厚≥1.4mm，低于1.4mm的属于非标料，长期使用易变形，验收时用卡尺实测75% similarUnverified尺寸适配要预留被芯厚度：选购时罩子的高度（侧边深度）应≥被芯/床垫厚度+3-5cm，否则强行套入会撑破拉链或导致包裹不严75% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/621916API
curl https://kongchang.com/api/v1/knowledge/claims/621916MCP
get_claim(id=621916)