Unverified88% confidenceDecision RuleTime unknown
卡扣式安装无需工具，直接按压嵌入孔位即可，但对桌面厚度有适配范围要求，过薄或过厚的桌板可能卡不牢
1
Sources
88%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified桌板厚度＜18mm或为空心/薄板密度板的桌子不建议用C型夹支架，夹持点受力集中易导致桌面开裂或凹陷，应改用穿孔式并加装大面积垫片85% similarUnverified夹装式（C-clamp）要求桌面厚度10-60mm且桌面为实心非悬空，穿孔式（Grommet）需要桌面预留孔位或可打孔；玻璃桌面、悬空桌沿、抽屉正上方的桌面均不适合夹装84% similarUnverified桌面深度＜55cm不建议买带底座占位的落地立式置物架，会严重压缩键鼠操作区，应选悬挂式或夹装式挂在桌沿/隔板上82% similarUnverified玻璃桌面、悬空/单柱支撑桌、过厚或过薄的桌面不适合夹持，安装前需确认桌面类型与厚度82% similarUnverified桌面深度＜50cm的浅桌不建议买占用面积＞20cm的横向大收纳盒，会挤压键盘和手臂操作区，应优先选纵向多层或抽屉式向上叠加82% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/803017API
curl https://kongchang.com/api/v1/knowledge/claims/803017MCP
get_claim(id=803017)