Delta Robot
A Delta robot is a parallel-structure robotic arm in which motors are fixed to the base, resulting in an extremely low-mass end effector. This configuration enables very high acceleration and response speeds. Delta robots are widely used in industrial high-speed sorting, packaging, and robotic motion control applications.
Timeline (last 90 days)
Under standard Delta robot test conditions (such as a 25/305/25 mm trajectory), cycle rates can reach 100–200 picks per minute.
When 12 robots work cooperatively, if the allocation logic is simple (such as fixed partitioning), some robots may sit idle while others are overloaded, and the overall cycle time is dragged down by the slowest single station.
Parallel robotic arms (such as Delta robots) mount motors on the base and have extremely low end-effector mass, enabling higher acceleration, but with a smaller workspace and limited degrees of freedom in orientation.
All Facts (3)
Under standard Delta robot test conditions (such as a 25/305/25 mm trajectory), cycle rates can reach 100–200 picks per minute.
50%UnverifiedWhen 12 robots work cooperatively, if the allocation logic is simple (such as fixed partitioning), some robots may sit idle while others are overloaded, and the overall cycle time is dragged down by the slowest single station.
50%UnverifiedParallel robotic arms (such as Delta robots) mount motors on the base and have extremely low end-effector mass, enabling higher acceleration, but with a smaller workspace and limited degrees of freedom in orientation.
50%