Unverified75% confidenceFactTime unknown
常见标准吊牌尺寸约4×6cm至5×8cm，穿绳孔径3-4mm并需打孔加固（铜圈/爆花）防止撕裂，无加固孔在蜡绳拉力下易撕破
1
Sources
75%
Confidence
Long-term
Relevance
-
First Seen
Sources
Related Entities
Related Claims
Unverified带穿孔的服装吊牌标准孔径约3-4mm，配套塑料吊粒（子母扣）长度分5cm/7cm/12cm，厚衣物如羽绒服需选7cm以上避免绷紧勒坏挂孔86% similarUnverified顶天立地式伸缩杆搁架的锁定长度必须留5-10cm余量：标称范围200-300cm的产品，实际稳固区间在210-290cm，接近极限值时管壁咬合变浅极易松脱坠落84% similarUnverified免打孔（无痕胶/3M胶）壁挂搁板单层实际安全承重通常≤3-5kg，超过5kg必须使用膨胀螺丝打孔安装，胶粘类长期承重会因胶体蠕变导致脱落84% similarUnverified确认是否附挂钩：画廊框(3.8cm厚框)一般背面预装挂绳或锯齿挂钩可直接上墙;薄框成品需自备无痕挂钩,大尺寸(>80cm)需承重≥5kg的膨胀螺丝而非3M胶贴84% similarUnverified挂厚度2.5cm的圆管衣通杆时，S钩上开口内径需≥3cm才能顺利卡入，开口过小会撑不进或反复摩擦掉漆84% similar
Cite This Claim
Stable URI
https://kongchang.com/claim/110635API
curl https://kongchang.com/api/v1/knowledge/claims/110635MCP
get_claim(id=110635)